Neutral organic lewis acids of π type

The interaction of some neutral acids of π type, bearing appropriate unsymmetrical substitutions at the C?C group with some selected bases (H₂O, NH₃, OH^?), is compared with that of the parent compound of a new set of neutral π acids, bearing symmetrical substitutions at the C?C group with the same bases. The analyses of the interaction energy, performed according to two decomposition schemes, with and without the counterpoise corrections, make clear the similarity of symmetrically and unsymmetrically substituted neutral organic acids.     

Metal-cinnamic acids interactions. Part III. Synthesis and study of copper(II) complexes of 3, 4- and 3, 5-dimenthoxycinnamic acid

Summary Copper(II) complexes derived from substituted cinnamic acids 3, 4-dimethoxycinnamic acid (3, 4-DMCH) and 3, 5-dimethoxycinnamic acid (3, 5-DMCH), of the formula [Cu(3, 4-DMC)₂]·H₂O (1), [Cu(3, 5-DMC)₂]·H₂O (2) were prepared. The magnetic properties of the complexes suggest dimeric structures typical of copper(II) acetate monohydrate-like complexes. X-band e.s.r. spectra of polycrystalline samples at low temperature are typical of triplet state systems S=1. Their ability to catalyze the aerial oxidation of 3, 5-di-t-butylcatechol was measured spectrophotometrically at 30°C. The complexes are models for oxidases.     

Reference-free NOE NMR analysis

Nuclear Overhauser Effect (NOE) methods in NMR are an important tool for 3D structural analysis of small molecules. Quantitative NOE methods conventionally rely on reference distances, known distances that have to be spectrally separated and are not always available. Here we present a new method for evaluation and 3D structure selection that does not require a reference distance, instead utilizing structures optimized by molecular mechanics, enabling NOE evaluation even on molecules without suitable reference groups.

A quantitative Nuclear Overhauser Effect (NOE) analysis approach that avoids the use of and internal reference distance to perform molecular configuration selection.     

Synthesis of some 2-(heteroarylamino)benzimidazoles and their cyclization with phosgene

2-(Benzimidazol-2-ylamino)pyridine (4a) , 2-(benzimidazol-2-ylamino)pyrazine (4b) , and 2-(benzimidazol-2-ylamino)thiazole (4c) underwent a ring-closure reaction on treatment with phosgene affording 6H-pyrimido-[1′,2′:5,4][1,3,5]triazino[1,2-a]benzimidazol-6-one (1a) , 6H-pyrazino[1′,2′:5,4][1,3,5]triazino[1,2-a]benzimidazol-6-one (1b) , and 5H-thiazolo[2′,3′:4,5][1,3,5]triazino[1,2-a]benzimidazol-5-one (1c) respectively. The structure of these hitherto unknown heterocyclic systems was confirmed by their ir and mass spectra.     

Reaction of tetrahydrobenz[a]acridinones with hydroxylamine hydrochloride. VII

Oximation of ortho-substituted phenylbenz[a]acridinones using hydroxylamine hydrochloride, sodium hydroxide and ethanol as the solvent gave always the benzoquinacridine N-oxide 2 . Oximation of para-substituted phenylbenz[a]acridinones, however, gave only the corresponding oximes. The structure of all products was corroborated by ir, ¹H and ¹³C-nmr and mass spectral data. Theoretical calculations support the experimental findings.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

Penetration and interactions of the antimicrobial peptide, microcin J25, into uncharged phospholipid monolayers

Microcin J25 forms stable monolayers at the air-water interface showing a collapse at a surface pressure of 5 mN/m, 220 mV of surface potential, and 6 fV per squared centimeter of surface potential per unit of molecular surface density. The adsorption of microcin J25 from the subphase at clean interfaces leads to a rise of 10 mN/m in surface pressure and a surface potential of 220 mV. From these data microcin appears to be a poor surfactant per se. Nevertheless, the interaction with the lipid monolayer further increase the stability of the peptide at the interface depending on the mode in which the monolayer is formed. Spreading with egg PC leads to nonideal mixing up to 7 mN/m, with hyperpolarization and expansion of components at the interface, with a small excess free energy of mixing caused by favorable contributions to entropy due to molecular area expansion compensating for the unfavorable enthalpy changes arising from repulsive dipolar interactions. Above 7 mN/m microcin is squeezed out, leaving a film of pure phospholipid. Nevertheless, the presence of lipid at 10 and 20 mN/m stabilize further microcin at the interface and adsorption from the subphase proceeds up to 30 mN/m, equivalent to surface pressure in bilayers.     

On the reaction of Ph2PNHPPh2 with RNCS (R=Et, Ph, p-NO2C6H4): preparation of the zwitterionic ligand EtNHC(S)Ph2P==NPPh2C(S)NEt (HSNS) and the zwitterionic metalate [(SNS)Rh(CO)

The reaction of Ph(2)PNHPPh(2) (PNP) with RNCS (Et, Ph, p-NO(2)(C(6)H(4))) gives addition products resulting from the attack of the P atoms of PNP on the electrophilic carbon atom of the isothiocyanate. When PNP is reacted with EtNCS in a 1:2 molar ratio, the zwitterionic molecule EtNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)Et (HSNS) is obtained in high yield. HSNS can be protonated (H(2)SNS(+)) or deprotonated (SNS(-)), behaving in the latter form as an S,N,S-donor pincer ligand. The reaction of HSNS with [(acac)Rh(CO)(2)] (acac=acetylacetonate) affords the zwitterionic metalate [(SNS)Rh(CO)]. Other products can be obtained depending on the R group, the PNP/RNCS ratio (1:1 or 1:2), and the reaction temperature. The proposed product of the primary attack of PNP on RNCS, Ph(2)PN==PPh(2)C(S)NHR (A), cannot be isolated. Reaction of A with another RNCS molecule leads to 1:2 addition compounds of the general formula RNHC(S)PPh(2)==NP(+)Ph(2)C(S)N(-)R (1), which can rearrange into the non-zwitterionic product RNHC(S)PPh(2)==NP(S)Ph(2) (2) by eliminating a molecule of RNC. Two molecules of A can react together, yielding 1:1 PNP/RNCS zwitterionic products of the formula RNHCH[PPh(2)==NP(S)Ph(2)]PPh(2)==NP(+)Ph(2)C(S)N(-)R (3). Compound 3 can then rearrange into RNHCH[PPh(2)==NP(S)Ph(2)](2) (4) by losing a RNC molecule. When R=Et (a), compounds 1 a, 2 a (HSNS), and 4 a have been isolated and characterized. When R=Ph (b), compounds 2 b and 4 b can be prepared in high yield. When R=p-NO(2)C(6)H(4) (c), only compound 3 c is observed and isolated in high yield. The crystal structures of HSNS, [(SNS)Rh(CO)], and of the most representative products have been determined by X-ray diffraction methods.     

Intercalation of α,ω-alkyldiamines in layered α-zirconium phosphate and the inclusion behaviour of some of the intercalates obtained

The paper reports a study on the intercalation mechanism of NH₂(CH₂) _n NH₂ (withn=2, 4, 6, 8, 10) diamines in layered Zr(HOPO₃)₂·H₂O, performed by titrating the host with aqueous solutions of amines at 80°C. The intercalation reactions occur stepwise according to the ‘moving boundary’ model, with the formation of a number of intermediate intercalation compounds of formula Zr(HOPO₃)₂·xNH₂(CH₂) _n NH₂ (0<x<1) before obtaining the fully intercalated ones (x=1). For each diamine the batch titration curve and a diagram of the phases involved in the interaclation reaction are reported. Twenty-two intercalation compounds have been isolated and characterized by their composition, XRD patterns and thermal behaviour, and information on the disposition of the guests within the interlayer region have been derived. At full intercalation the diamines form a monolayer of extended molecules with their axis inclined at 58° to the plane of the sheet. The terminal amino groups are protonated by the —POH groups of the host, thus each diamine binds adjacent layers and, in a sense, transforms a layered structure into a framework structure that may have an accessible or potentially accessible porosity. The intercalation compound Zr(HOPO₃)₂·0.5NH₂(CH₂)₈NH₂ is indeed able to include polar molecules such as water and short chain alkanols.